Ridge and hip specification

Ridge and hip solution specification :

The ridge and hip will be water-proofed using a dry solution without mortar. The material used will be an aluminium sheet with PIB insert, butyl adhesive edges, and prepunched holes covered with a special breathable membrane. It will be minimum 28 mm width.

The laying will be done on top of a ridge/hip runner to ensure a correct support of the material, avoiding water stagnation. Ridge tiles will be laid on top and fixed with nails or clips.
The start and end of ridges will covered with special tiles as well as the different apex of the roofs to ensure an harmonious aesthetic.

 

Compactroll

Main technical characteristics

Compactroll Materials : aluminium sheet with PIB insert, butyl adhesive edges, and prepunched holes covered with a special breathable membrane. 
Weather Stability : Weatherproof and UV-resistant, colour fast, can be laid in hot weather..
Standard Colours : Red and Brown .
Size :  28cm width X length of a roll : 10m (can be cut with scissors)
Weight :10m roll = approx. 3kg.

Ridge Tree

Main technical characteristics

Product Description :
This is a solid fixing device which acts as a guide for optimal alignment for fixing of ridge and hip runner. It enhances the aesthetic of the ridge and hip line.

Material : Galvanised steel